VOOPOO DRAG 157W TC Box MOD W/O Battery
Powered by dual 18650 batteries, VOOPOO DRAG supports max 157w output power. It features GENE chip, super mode and fastest fire speed – 0.025s. Carbon Fiber Edition and Resin Edition for your selection.
Powered by the 32-bit super US Gene Fun chip, the VOOPOO DRAG MOD can bring what you have always wanted – Max 157W output power, powerful temperature control of Ni, Ti and SS coils, super mode with 130w and the fastest fire speed ever at 0.025s. You can always keep the mod up-to-date with upgradeable firmware too so you will never miss anything new. The attractive appearance is another feature that makes this mod simply irresistible: don’t miss out! Carbon Fiber Edition and Resin Edition are available. The Resin Edition VOOPOO DRAG is made of iMported eco-friendly resin which is more smooth, durable and comfortable with fashionable looking and unique psychedelic pattern. Get one DRAG MOD for your daily use!
Size: 90 x 54 x 24mm
Working Voltage: 6.4-8.5V
Output Voltage Range:0-7.5V
Resistance range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Output Power: 5-157W
It comes with
- 1 x VOOPOO DRAG MOD (without cell)
- 1 x USB Cable
- 1 x User Manual
- 1 x Warranty card
- It doesn’t come with 18650 lithium-battery.(High rate discharge battery ≥35A)
- 510 thread
- Note: The Resin Edition VOOPOO DRAG MOD comes in a fashionable looking and each one has its own unique psychedelic pattern. We could not guarantee the product has the same pattern and color as that in pictures
32 bit super US Gene.Fun Chip
Powerful PWM and MOS Module
Fastest fire speed – 0.025s
Max 157W Output power
Carbon Fiber Edition & Resin Edition
Power on/off: Press the fire button 5 times in quick succession to turn the device on and off.
Mode Switch：Press the fire button 3 times quickly, the four interfaces can be switched orderly under normal startup condition. Constant power and temperature control SS/Ni/Ti.
Temperature Adjustment: When the temperature was set to 100℃, keep on pressing the down button, temperature will turn to 600F. When the temperature was set to 200F, keep on pressing the down button, temperature will turn to 315℃. Quickly press the fire button 4 times can get into wattage adjust interface. Then you will see the letter “W” is flashing. The adjustable wattage is 5W to 80W.
Function Menu: Press uo and down buttons simultaneously for 1.5 seconds, enter the function menu interface. Press up button or down button simultaneously to choose th function. Press the fire button to make confirmation and go to next step.
Customization Mode: Press up and down buttons simultaneously for 1.5 seconds, the device will go to the function menu interface. Press up and down button to choose the Customization Mode and press fire button to go into Customization Mode interface. Under Customization Mode, press fire button 3 times continuously, 4 kinds of Customization Mode can be switched sequentially: Stable Power Mode, Temperature Control Mode:TC-SS316/TC-Ni200/TC-Ti.
Sleep Mode: If there is no operation for 30 seconds, screen will turn off. No operation for 30 minutes after the screen off, the device will enter sleep mode.